Moon-2m White Silicone Shower Barrier And Retention System,Anti Overflow Shower Threshold Self Adhesive Rubber Water Dam,Waterproof Door Seal For Bathroom Floor

• 【Installation Notes】:1. Around the Italian shower barrier should be sealed with additional glue sealant (package does not include). 2. For better adhesion, you can heat the back glue with a hair dryer. 3. In the corner, we recommend that you cut it at 45 degrees, then connect two parts to ensure its firmness.
• 【Height 12mm/0.47inch】:The height of the bathroom shower barrier is only 12mm. Compared with the collapsible shower tray seal, it cannot block the water flow with height > 12mm, but the low height will not cause movement obstacles and can block the spread of water in a large area. Please clarify your needs before purchasing.
• 【Wide Usage】: 1. The kitchen worktop seal can be used on the edge of the worktop (kitchen sink, washbasin, window sill, bathtub edge). 2. Can be used on the floor (bathroom floor, shower tray, around the toilet or the washing machine, balcony floor).3. Can be used as a threshold (bedroom door, bathroom door). 4. Can be used to block gaps 0-20mm (between countertop (bathtub, floor) and wall.
• 【High Quality Silicone Material】: The shower waterproof strip is made of Food grade organic silicone, corrosion resistant, high temperature resistant, wear resistant and no peculiar smell.It is flexible and can be cut at will, and the smooth surface makes it very easy to clean.
• < li>【Quality service】: If you are not satisfied after receiving the shower enclosure seal, please feel free to contact us, we will provide you with the best solution within 24 hours.

Countertop Water Retention Strip
Our water retention strips can be used on kitchen sink edge, stove edge, bathroom sink edge and the edge of the window sill to avoid wetting clothes and the floor, and keep the kitchen and bathroom clean and organized

Shower floor
The shower barrier can be used on the bathroom floor, the edge of the shower tray, as a threshold, and achieve the effective separation of dry and wet.

Bridging the gap
The silicone water barrier can be used to fill the gaps, such as between the sink and the wall, between the bathtub and the wall, to prevent water from entering the gaps, moldy and difficult to clean.

Corner decoration
Our shower threshold is designed at a right angle, which can fit the countertop (floor) and the wall well, can decorate the corners and gaps, and achieve the effect of waterproofing.

Warm advice for installation

• Buy a size 5cm-10cm longer than the required length
• Clean the floor and dry it before installation.
• If the floor is uneven, fill it with silicone sealant before installation.
• Use sealant silicone to coat the ends and edges of the shower water barrier.
• After the installation is completed, it should be kept dry for 24 hours and postponed for 1-2 days in autumn and winter.
• Not bent freely. It can only be installed in a straight line.
• In the corner, cut at 45 degrees, then season the two parts at 90 degrees.